LARIVER GRP (glass-fibre reinforced plastic) in flat panels is widely used in the RT body-building sector.
LARIVER GRP is produced on modern continuous lamination lines using high quality polyester resins and glass fibre to provide a product with high mechanical strength.
Resistance to Corrosion
The product has good resistance to general corrosion by chemical and salt water.
Biological Resistance
The product has good resistance to micro-organisms, algae, mildew and fungus
Sizes Available
Colour: Milk White or Blue
Thickness: 1.3mm
Width: 2550mm
Full Rolls: 42 metres long
Cut sheets: From 4000mm long (minimum)
Different coil widths and / or coil lengths are available on forward order
Dimensional Tolerances
Unit Weight: + or – 10%
Average Thickness: + or –15%
Width: + or – 1%
Lengths: + or – 1%
Mechanical Properties
Tensile Strength: > 50 MPa
Bending Strength: 80 – 90 MPA
Modulus of Elasticity: 6000/7000 MPa
Elongation: Approx 2%
Bakol Hardness: >40
Other Properties
Self-ignition Temperature: Approx 480OC
Fibre-Glass Content: 25 / 30%
Light Transmission: >50%
Density: 1.4 -1.45 g/cm3
Service Temperature: -40 to +120 Centigrade
Water Absorption: 0.2%
Thermal Linear Expansion Coefficient: 2.7 x 10-5 cm/cm/degree C
Heat Transmission Coefficient: Approx 5Kcal/m h degree C